The two-component epoxy injection resin shall be RIPSTAR 155, low viscosity resin system having viscosity less than 350 cps at ambient temperatures. The injection resin shall be high strength and shall develop compressive strength in excess of 55 MPa at 1 day & 65 MPa at 7 days. The product shall exceed 55 MPa in flexural strength at 7 days and shall exceed 15 MPa in slant sheer bond
strength. The product shall have minimum pot life of 30 minutes at ambient temperatures. The injection resin shall comply with ASTM C881, Type 1 & 4, Grade 1, Class B &C. The injection resin must have pass rating for shrinkage test as per ASTM C881 and shall be impermeable.

Leave a Reply

Your email address will not be published. Required fields are marked *